Innovative
|
Innovative Roof Coatings
Solutions for Complete Roof Restoration
COOL ENERGY ROOFING SYSTEMS, offers innovative roof coatings that guarantee water protection and heat resistance as well as year-long power savings and cost efficiency! Specializing in polyurethane liquid applications for commercial roofs, we provide metal, foam, and rubber coatings from Conklin® with an emphasis on complete roof restoration. Read on to learn how we can fix, restore, and improve your roofs with our roof coatings!
Ways We Service Your Roof
Metal Restoration
|
Step 1: We pressure wash and clean your roof with an acidic cleaner that kills the rust. Step 2: We spray on a primer that neutralizes the rust and keeps it from spreading. |
Step 3: We tape and seal all seams with a 2.5-inch fabric embedded in acrylic coatings and caulk all screw heads. Step 4: We spray on the finished topcoat of polyurethane and acrylic coating. |
Metal Restoration (Before)
|
Metal Restoration (During)
|
Metal Restoration (After)
|
SPF Foam
|
Step 1: We clean and prep your roof surface. Step 2: We spray on the slow-rising, closed-cell foam. |
Step 3: We spray on and back-roll the polyurethane and acrylic base coat. Step 4: We spray on the polyurethane and acrylic topcoat. |
SPF Foam (Before)
|
SPF Foam (During)
|
SPF Foam (After)
|
Flexion Membranes
|
Step 1: We clean and prep your roof surface. |
Step 2: We install the underlayment or ISO board. |
Step 3: We install the rubber membrane. |
Flexion Membranes (Before)
|
Flexion Membranes (During)
|
Flexion Membranes (After)
|
EPDM and TPO Restoration
We can restore your existing rubber membrane roof without having to do any tear-off!
|
Step 1: We clean and pressure wash your roof surface. Step 2: We spray on the tack coat, which is a primer. |
Step 3: We spray and roll a 6-inch fabric embedded in polyurethane and acrylic base coat on all seams and the perimeter of the roof. Step 4: We spray on the finished polyurethane and acrylic topcoat. |
EPDM and TPO Restoration (During)
|
EPDM and TPO Restoration (After)
|
Reinforced Fabric
The whole roof is fabric-embedded in polyurethane and acrylic base coat; the fabric is overlapped to make a seamless roof.
|
Step 1: We clean and pressure wash your roof surface. |
Step 2: We spray on and roll a 3-feet fabric with polyurethane and acrylic base coat. |
Step 3: We spray on the polyurethane and acrylic topcoat. |
Reinforced Fabric (Before)
|
Reinforced Fabric (After)
|
Speak With Our Roof Restoration ExpertsFix and strengthen your roofing system today with the perfect coating. Speak with our roof restoration experts to determine the right solution for your commercial roofs. If you have further inquiries about our roof coatings, please do not hesitate to discuss them with our professionals. |
Advantages of Our Roofing InnovationsReducing Surface Temperature. Lowering Energy Costs.Roof coatings that are either rolled or sprayed onto metal roofs can lessen the surface temperature by 80 degrees or more. With reduced heat passing through the roofs, properties use cooling systems less to maintain the ideal indoor temperature, which equates to decreased energy consumption. The amount of money that is saved in the reduction of energy costs will quickly add up. These types of roof coating systems can quickly pay for themselves with these savings, but there are other huge advantages that only a cool roofing system can offer.
|
|
Preventing Roof Replacements
In the past, it was common practice to completely remove a metal roof when it started to show obvious signs of wear and tear, such as leaks springing up and causing problems. These signs can start making themselves noticed in as little as ten years. A roof coating can stop metal roof leaks for decades because it has no seams.
Typically, a roofing crew is hired to strip the older metal roof from the building. Every portion of the old roof is then loaded into trucks to be carted off into landfills. The roof is replaced with a new metal roof. However, today, there is a much better option for several very obvious reasons.
A Conklin® acrylic elastomeric coating can be applied to an existing metal roofing system to completely eliminate all of the waste that is clogging up landfills, while saving valuable labor hours that are typically spent on a traditional roof replacement.
Typically, a roofing crew is hired to strip the older metal roof from the building. Every portion of the old roof is then loaded into trucks to be carted off into landfills. The roof is replaced with a new metal roof. However, today, there is a much better option for several very obvious reasons.
A Conklin® acrylic elastomeric coating can be applied to an existing metal roofing system to completely eliminate all of the waste that is clogging up landfills, while saving valuable labor hours that are typically spent on a traditional roof replacement.
